Youtube


    Apprenticemath

    11:2
    автор | дата 20.03.2013
    • 106908
    • 428
    • 43
    Проголосовало пользователей: 471
    Terms explained and calculation shown. To do this, you must be able to convert decimal inches and decimal feet to ft-in-fractions and back FAST and be able to do ratio and proportion calculations. Error: at 6:05, 6:30 and 7:10 I say "mm" 3 times. My bad, correct is "cm". Numbers are good.
    ЕЩЁ
    • СКАЧАТЬ
    автор | дата 21.07.2013
    A good set of stairs needs precise layout after an accurate calculation. See what it takes to build stairs that are safe and meet the Building Code.
    • СКАЧАТЬ
    автор | дата 06.02.2018
    Terms defined and explained.
    • СКАЧАТЬ
    автор | дата 20.07.2013
    Math shown step-by-step. Be good at converting fractions to decimals and back, and using the Pythagorean theorem. Building Code compliance is covered ...
    • СКАЧАТЬ
    автор | дата 08.09.2012
    Conversion shown both ways. By extending the pattern shown in converting whole number seconds like 8 sec, can you convert 0.1 sec to decimal hours?
    • СКАЧАТЬ
    автор | дата 26.08.2012
    Pre-requisite for S.O.L calculations is being able to add and subtract whole numbers for metric calculations; add and subtract fractions for imperial calculations.
    • СКАЧАТЬ
    автор | дата 08.09.2014
    Ratio and scale numbers explained and use shown.
    • СКАЧАТЬ
    автор | дата 03.12.2014
    Concept explained and 4 practice measurements. Note: Be fluent with the 16ths and equivalent fractions before trying to make sense out of this video.
    • СКАЧАТЬ
    автор | дата 05.11.2012
    Measurements are demonstrated step-by-step to the full range of the instrument. Pilot hole size measurement is taken during the demo as well as measuring a ...
    • СКАЧАТЬ
    автор | дата 21.10.2017
    What are some of the things that you need to know in order to pass the math portion of the aptitude test for electrical trade school? I provide some examples of ...
    • СКАЧАТЬ
    автор | дата 22.01.2014
    Concept explained with examples.
    • СКАЧАТЬ
    автор | дата 16.02.2014
    Gold alloys and purity explained. Courtesy of GeoGem International Jewellers. http://kingstonejeweller.com/
    • СКАЧАТЬ
    автор | дата 19.06.2013
    See how the numbers work on the dials to measure run-out or out-of-round. The idea works in fractions or decimals, metric or inch-based as well.
    • СКАЧАТЬ
    автор | дата 03.10.2016
    Pros, cons, observations on model number CS1.
    • СКАЧАТЬ
    автор | дата 26.03.2018
    Insight into the sectrets of student success rates.
    • СКАЧАТЬ
    автор | дата 26.07.2014
    Concept, math and uses.
    • СКАЧАТЬ
    автор | дата 27.01.2018
    The methods in this video are the foundation in Carpentry and will help any apprentice or handyman drastically increase their abilities. In part 1 of 4, I quickly run ...
    • СКАЧАТЬ
    автор | дата 20.12.2014
    Watch and find out what bus stops, an acre and oxen have in common.
    • СКАЧАТЬ
    автор | дата 12.07.2014
    Areas of attention in stair math for safety.
    • СКАЧАТЬ
    автор | дата 03.12.2016
    Step-by-step sample calculation to ensure the ship loading is as even as possible.
    • СКАЧАТЬ
    автор | дата 21.06.2015
    Metric (cubic meter) and feet-based (cubic feet, board feet) calculations shown.
    • СКАЧАТЬ
    автор | дата 18.09.2017
    A visual guide under 10x, 60x and 200x magnification. Most emeralds are highly included, have lots of cracks so they are really brittle. Handle accordingly.
    • СКАЧАТЬ
    автор | дата 05.09.2012
    For addition and subtraction trading and carry over amounts exchange in multiples of 12. Mixed fraction whole numbers as a result of from fraction addition carry ...
    • СКАЧАТЬ
    автор | дата 02.10.2012
    Trades math is sometimes simpler, sometimes way more complex than the academic math. See geometric and arithmetic examples for both. If trades math was ...
    • СКАЧАТЬ
    автор | дата 21.07.2013
    Stairs are regulated in great detail as they are a major concern for safety. Watch and see what matters and what not.
    • СКАЧАТЬ
    автор | дата 25.06.2015
    25 key terms explained.
    • СКАЧАТЬ
    автор | дата 10.09.2016
    Inaccuracy cases due to geometric misfit.
    • СКАЧАТЬ
    автор | дата 17.10.2014
    Demo and explanation.
    • СКАЧАТЬ
    автор | дата 19.09.2013
    Measurement shown, result in rise(drop)/run, %, and degree angle formats.
    • СКАЧАТЬ
    автор | дата 23.11.2015
    A look at 10 major features that affect measurement accuracy.
    • СКАЧАТЬ
    автор | дата 16.08.2014
    Horsepower (electrical) converted to Amps and back. Manufacturers lie. Inflated claims on labels don`t agree with math (multiplication and division from Grade 4) ...
    • СКАЧАТЬ
    автор | дата 27.08.2014
    Scale explanation and 3 practice measurements.
    • СКАЧАТЬ
    автор | дата 06.08.2015
    Used in finding even spacing for shelves, hinges, posts, roof joists, openings in walls. No-conversion 3 sample calculations.
    • СКАЧАТЬ
    автор | дата 30.04.2017
    3 calculation examples step-by-step.
    • СКАЧАТЬ
    автор | дата 22.03.2013
    Learn why the run = length in small buildings, but not in LONG buildings. Terms explained and calculation shown. To do this, you must be able to convert ...
    • СКАЧАТЬ
    автор | дата 31.03.2014
    3 approaches shown, from least accurate but useful approximation to most precise calculation.
    • СКАЧАТЬ
    автор | дата 10.10.2015
    2 possible geometric configurations explained.
    • СКАЧАТЬ
    автор | дата 20.03.2013
    Learn to use the pipe schedule to calculate how much a length of pipe weights empty or filled with water. Make sure the schedule is made for the pipe`s material; ...
    • СКАЧАТЬ
    автор | дата 05.09.2012
    Fancy specialty calculators may not be around on the job site, learn to convert in writing using a basic calculator. To multiply 7`- 5 1/4" x 2` - 3 3/8", conversion to ...
    • СКАЧАТЬ
    автор | дата 23.08.2016
    Steel classification terminology explained.
    • СКАЧАТЬ
    Популярные тэги
      Сейчас смотрят
      Пользователи